3t gravel e bike 3T Extrema Italia Rival/GX AXS Gravel Bike

The 3T Extrema Italia Rival/GX AXS Bike is built in 3T's own factory in northern Italy using proprietary filament winding and RTM (resin transfer molding) technology — a manufacturing process that gives 3T direct control over the carbon layup rather than outsourcing production to a contract facility. The Extrema Italia is the more aggressive member of 3T's gravel lineup, engineered around tires in the 47–57mm range. Where the Racemax Italia is optimized for mixed tarmac and gravel at pace, the Extrema is built for the opposite: terrain where massive tire volume, dropper post compatibility, and stable geometry matter more than flat-road speed.

The 3Touring geometry reflects that intent. Stack is higher and reach shorter compared to the Racemax, giving the rider more upright control on loose, technical ground. Head tube angles run between 69.1 and 72 degrees depending on frame size — notably slack for a drop-bar gravel bike — and fork offset is extreme by category standards, ranging from 61 to 73mm across sizes. Together, those numbers translate to stability and confidence when conditions get rough without making the bike feel sluggish when they don't. The 27.2mm round seat tube is compatible with wireless dropper and suspension seatposts, which is unusual for a drop-bar platform and practical for anyone planning long days on unpredictable terrain. Four sizes (51–58cm) cover a wide range of riders, available in Terra and Mercurio colorways.

REALFAST Aerodynamics and Frame Design

3T's REALFAST aero approach starts with actual measured tire dimensions rather than labeled sizes — what 3T calls WAM (Width-As-Measured), which reflects how a tire actually inflates on a given rim. The Extrema's frame is engineered around 47–57mm WAM tires in 700c. The downtube narrows to 60mm directly behind the front tire to manage the turbulent airflow coming off the wheel, then widens to 75mm toward the bottom bracket, redirecting that flow around the water bottles and integrating them into a complete aerodynamic system. The headtube uses an elongated aero profile with a truncated trailing edge, narrowing the front end between the two headset bearings. A close-fitting rear wheel cutout manages airflow at the back.

The downtube also houses an integrated storage compartment — a practical feature for mixed-surface days and adventure racing. The compartment opens via a Fidlock Mini-hook lever closure and contains a Missgrape-developed neoprene bag that keeps tools and tubes secure against vibration. The fork runs triple accessory mounts on each leg, and integrated fender mounts are built into both frame and fork. Direct-mount brake caliper integration at front and rear eliminates the adaptors normally required for 160mm rotors — cleaner and lighter than the standard setup.

3T MORE Integrale Cockpit System

The 3T MORE stem pairs with the 3T Superghiaia LTD handlebar via the MORE Integrale system for clean internal cable routing. The practical difference from most integrated cockpit designs is that the MORE Integrale allows stem height adjustments and stem swaps without disconnecting or bleeding the hydraulic brake hoses. Changing stem length or adjusting stack height doesn't require touching the brakes — a meaningful advantage for fit adjustments and travel. A dedicated K-Edge GPS mount, sized for Garmin and Wahoo computers, is included. The 3T MinMax Integrale headset (IS42/34 | IS52/40) routes cables through the steerer rather than requiring oversized bearings to house them, keeping the headtube narrow and the front-end weight low.

SRAM Rival/GX Eagle AXS Drivetrain

The drivetrain pairs SRAM Rival AXS components at the front with a SRAM GX Eagle Transmission rear derailleur — a mixed build that combines Rival's hydraulic braking and wireless shifting with GX Eagle Transmission's direct-mount UDH interface and chain retention record. SRAM Rival AXS handles the shifters, brake levers, hydraulic calipers, and the 40T single-ring crankset. At the rear, the GX Eagle Transmission rear derailleur works with a 12-speed 10–52T cassette through SRAM's T-Type system, which uses a direct UDH mount to the frame's rear hanger for improved durability and chain security on rough terrain. The full system is wireless. SRAM 160mm rotors mount directly to front and rear without adaptors.

3T Discus Wheels and Continental Tires

The 3T Discus 45|40 wheelset runs 45mm depth at the front and 40mm at the rear — an asymmetric profile that takes advantage of the rear wheel's sheltered position in the bike's draft while keeping the front wheel more manageable in crosswinds. Both wheels run 3T hubs. Continental Race King tires mount at 700x50, a fast-rolling XC-influenced knob pattern suited to the Extrema's pace-focused intent on mixed terrain. The 700x57c maximum clearance leaves significant room to run wider rubber when conditions require more traction or cushion.

Final Take

The Extrema Italia fills a specific role: a carbon gravel bike that carries tire volumes normally associated with mountain bikes while retaining a wireless race drivetrain, aerodynamically engineered carbon, and an adjustable integrated cockpit. The combination of dropper-post compatibility, internal storage, triple fork mounts, and REALFAST aero is substantive — these aren't checkboxes but features that change how the bike functions over a long day. At $7,679, reduced from the $9,599 regular price, it's a strong entry point into the Extrema Italia platform. The one thing to confirm before purchase: bar width and reach are set by the cockpit selection for each frame size. Getting your fit dialed beforehand is worth the time.